Process Valves Suppliers in Mumbai India
Size Range: 8- 50mm
Six body sizes utilising a large variety of seat materials and pipe
connection styles to satisfy a wide range of application specific
designs.Reduced bore range of general service ball valves available in
carbon or stainless steel, brass and other materials. Features:
|
|
Size Range: 65-1 50mm SANCO Series ball valves in sizes 65mm to 150mm complements the
Series 44 to provide the most versitile, reliable and widely available
three piece range.With a wide range of seat materails available, the
valve is suitable for a most applications within the process industry up
to 50 Bar. Features:
|
|
Size Range: 8- 50mm Body Material: Carbon Steel, Stainless Steel (Others on request) Seat Materials: Virgin PTFE, Reinforced PTFE End Connections: Screwed, Socket Weld, Butt Weld Pressure Rating: 70 - 103 Bar SANCO Series is a three-piece, fire-safe and anti-static ball valve
designed in accordance with BS 6755 Part 2.The F44 is available in
either stainless or carbon steel, a variety of end connectors and a
range of sizes from 8mm to 50mm. It features graphite gland and body
seals and 8 high tensile body connector screws for strength in fire
conditions. Features:
|
|
Size Range: 8- 50mm (Reduced Bore) SANCO Series AW44 avaiable in sizes 15mm to 50mm designed
specifically for steam and thermal fluid applications to minimse the
loss of the process media.The valve incorporates the unique Fluorofill
seat material allowing continuous satuarted steam service up to 17 Bar.
The valve also incorporates PTFE coated stainless steel body gaskets to
maintain sealing capbility during thermal cycling.The valve is also
suitable for use on thermal fluid and hot oils up to 250°C or up to
280°C with other seat materials. Also available as full bore up to 40mm
as the AW59 Series. Features:
|
|
Size Range: 8- 50mm (Reduced Bore) Specifically designed for use in high pressure applications, the
5HP44 is suitable up to 345 Bar depending on media. Pressure is limited
to 207 Bar on Group 1 gases under PED rules and a 3HP44 product would be
offered on these applications.The valve uses Delrin or PEEK seats with a
high strength stem build, o-ring body seals and special body
construction.Typical appications would be oil, inhibited water and
nitrogen gas. Available with screwed or welded end connections to suit
customer requirements Features
|
|
Size Range: 8- 50mm (Reduced Bore) Flowserve Worcester's experience and expertise in the design of cryogenic ball valves has been recognised throughout the process industry for over 30 years.Utilising a combination or our Fluorofill seat material and unique 'S' gasket body seal, the valves provides positive shut-off in the most demanding of cryogenic applications. The latest C44 R7 design provides additional technical advantages to provide the best cryogenic ball valve on the market. Suitable for applications below -196°C, the valve can also be fittd with the proven Flowserve Worcester V-Flow metal seat to provide accurate control of liquid gases. Also available as full bore up to 40mm as the C59 Features:
|
|
Size Range: 8- 50mm (Reduced Bore) Developed from Worcester's highly successful Series 44 three-piece
ball valve, the 13/14 simplifies process systems by replacing two valves
with one. The 13/14 is available in sizes from 20mm' to 50mm, a range
of end connections and materials of construction. Features:
|